PRODUCTS
       
 
 BOJANALUX -
 Lazure paint
  BOJANALUX -
Lacquer lazure
 
         



Content: Alkyd resins, photo-resistant pigments, hydrophobic substance and other additives.

Purpose: Protection and decoration of the wood, suitable both for inside and outside use: windows, doors, fences, panelled walls, etc.

Typical characteristics: Nice transparent shades in colours of exotic kinds of wood, which emphasize the natural structure of the wood. Silky gloss, good protection of wood from water, UV rays and bio-degradation.

Technical characteristics: Appearance of the coating: transparent with silky gloss.
Drying time: 16-24 hours before the next coat is applied.
Density: 0.878-0.890 g/cm3
Viscosity: 14-18 s by 4 DIN 53211/20C.

Usage: 1 kg for 8-10 m2 for one layer
Flash point: above 28C, Abel-Pensky, closed receptacle.

Application: For internal use, 1-3 coatings depending on the effect you want to achieve. For external use it is recommended to apply in 3 layers, using the brush, sponge, cloth, by soaking or sprinkling, allowing 16-24 hours to dry. On very exposed surfaces it is recommended to apply in the following way: 2 layers of BOJANALUX wood stain and 1 layer of BOJANALUX wood lacquer. No thinning required! Stir well before use. The tools are cleaned by the oil thinner.

Assortment:

clear (o1)
pine (02)
teak (03)
walnut (04)
ebony (05)
oak (06)
mahogany (07)
palisander (09)
? as well as other shades by order.

NB: clear lacquer is not to be applied as independent or finishing coating for outside use.

Packaging: 0.75 L/ 3 L (20 L by order).

Storage: In the closed space away from direct sunlight or other source of heat, in a sealed package and at temperatures up to +30C.

Expiry period: Under the conditions described above, in original package, 36 months.




 


Content: Alkyd resins, photo-resistant pigments, hydrophobic substance with extra gloss and protective function, and additives.

Purpose: Protection and decoration of the wood, suitable both for inside and outside use, with extra gloss and thicker film: windows, doors, fences, panelled walls, etc.

Typical characteristics: Nice transparent shades in colours of exotic kinds of wood, which emphasize the natural structure of the wood. Silky gloss, good protection of wood from water, UV rays and bio-degradation.

Technical characteristics: Appearance of the coating: transparent and glossy.
Drying time: 16-24 hours before the next coat is applied.
Density: 0.904-0.908 g/cm3
Viscosity: 25-35 s by 4 DIN 53211/20C.
Usage: 1 kg for 8-10 m2 for one layer
Flash point: above 28C, Abel-Pensky, closed receptacle.

Application: For internal use, it is used independently or in combination with BOJANALUX wood stain, in desired number of layers, depending on the effect you want to achieve on the surface. For outside use it is recommended to apply in 3 layers, out of which 2 should be off BOJANALUX wood stain and 1 layer of BOJANALUX wood lacquer, or on extremely exposed surfaces 1 layer of BOJANALUX wood stain and 2 layers of BOJANALUX wood lacquer. To be applied by brush, roller or by sprinkling, allowing 16 to 24 hours in between the layers. Not to be thinned! Stir well before the application. Tools are to be washed by oil thinner.

Asortiman:
clear (o1)
pine (02)
teak (03)
walnut (04)
ebony (05)
oak (06)
mahogany (07)
palisander (09)
? as well as other shades by order.



Packaging: 0.75 L/ 3 L (20 L by order).

Storage: In the closed space away from direct sunlight or other source of heat, in a sealed package and at temperatures up to +30C.

Expiry period: Under the conditions described above, in original package, 36 months.



 

   
 
     
©2004 Yellow Pages Co.