APPLICATION RANGE  
 POS TINTING SYSTEM

Typical range of some 20 shades (or less) per paint product, usually offered by paint makers, does not satisfy an average paint buyer of today.
People do not want their homes and offices to be jus "red" or "ivory" or "green", today they are looking for specific, compatible shades, to match the harmony...




 LATEST NEWS


"BOJANA" is extending its range of interior emulsion paints...




 New BOJANALUX  METAL PRIMER BS


The industries of metal products and larger craft workshops have big problems with painting the series of their metal products. The biggest problem is the space...




 REMEDY FOR STAINS


STAIN-BLOCKING PAINT, produced by "Bojana" D.O.O., Belgrade, is the novelty on our market, which should be welcomed by every professional or a DIY person...



   
 
  • PROTECTION AND DECORATION OF THE WOODEN SURFACES AND OBJECTS
  • PROTECTION AND DECORATION OF THE WALLS
  • PROTECTION AND DECORATION OF METAL SURFACES AND OBJECTS

  •  
    PROTECTION AND DECORATION OF THE WOODEN SURFACES AND OBJECTS
         
    LAZURE PAINTS

    1. paint
    , 80 - 100 g/m2
    - BOJANALUX BIOCIDE IMPREGNATION
    2. paint, 80 - 100 g/m2, cca 16 do 24 hours upon application of one layer
    - BOJANALUX LAZURE PAINT, in desired color
    3. paint, 80 - 100 g/m2, 16-24 hours after the 2nd layer application
    - BOJANALUX LAZURE PAINT ili
    - BOJANALUX LACQUER LAZURE, in desired shade

      FINISHERS

    1. paint
    , 100 - 120 g/m2
    - BOJANALUX OIL WOOD PAINT
    2. paint
    , cca 100 - 120 g/m2, 16 - 24 upon application of one layer
    - BOJANALUX ENAMEL LACQUER desired shade
    3. paint, cca 100 g/m2, 16-24 hours after the 2nd layer application
    - BOJANALUX ENAMEL LACQUER in desired shade or
    - PROFESSIONAL ENAMEL LACQUER
     
    Notes:
    • Never use BOJANALUX BIOCIDE IMPREGNATION, BOJANALUX LAZURE PAINT (CLEAR), BOJANALUX LACQUER FOR BOATS or BOJANALUX OIL WOOD PAINT as independent paints or finishers for the outsied work!
    • BOJANALUX LAZURE PAINT (CLEAR) is intended just to soften the shade ofBOJANALUX LAZURE PAINT when necessary, or as an independent or finishing coating exclusively for the inside works.
    • It is required to prepare the surface in advance: dry and clean wood (max 15-16% moisture)
     
    - inside works-
     
    LAZURE PAINTS

    Combine as necessary 1- 2 layers BOJANALUX LAZURE PAINT and/or BOJANALUX LACQUER-LAZURE in desired shade, depending on the wanted effect, in amounts
    from 80 - 100g/m2 per layer and allowing 16 - 24 between the layers
    CLEAR PAINTS

    1 to 3 layers of - BOJANALUX LACQUER FOR BOATS, depending on the desired effect.
    FINISHERS

    1. paint, cca 100 g/m2
    - BOJANALUX OIL WOOD PAINT

    2. paint, cca 100 g/m2, 16 - 24 hours after 1st layer
    - BOJANALUX ENAMEL LACQUER indesired shade
    3. paint, cca 100 g/m2, 16 - 24 hours after the 2nd layer BOJANALUX ENAMEL LACQUER, in
    desired shade or
    PROFESSIONAL ENAMEL LACQUER for permanent high gloss
     
     
    BIOPREVENTION OF WOODEN CONSTRUCTIONS
    (INSIDE WORKS-SPACES PROTECTED FROM THE ATMOSPHERIC INFLUENCE)

    Wooden constructions which need not be decorated, and they are protected from the atmospheric influence (attics, inside of the shed, etc.), are ideally protected from biodegradation with one rich layer of BOJANALUX BIOCIDE IMPREGNATION.

     
    PROTECTION AND DECORATION OF THE WALLS
     
    - outside works-
     

    ZFor every outside painting, and ESPECIALLY for painting over the concrete, gas-concrete, eternite, old layers of paint, etc. IT IS RECOMMENDED that the walls are impregnated in advance using FASALUX IMPREGNATION. This product is not water-based, but it can serve as excellent basis for ALL fašade paints because of the following characteristics:

    - it penetrates deeply into the surface, binding the loose and weak layers;
    - ideally binds the following layer of paint (whatever the paint is- water or solvent based) to the surface, which SIGNIFICANTLY EXTENDS THE DURATION OF THE COATING AND THE TIME IN WHICH THE NEXT COATING IS TO BE APPLIED. It also REDUCES THE AMOUNT OF THE USED PAINT.

    Then apply: 1st and 2nd layer allowing at least 8 hours - FASALUX FASADE PAINT (permanent type), or 1st and 2nd layer allowing at least 6 - 8 hours BOJANAFAS FASADE PAINT

    UIn both types we declare the use of cca 4 m2 per 1 kg of paint, but the realistic amount of the paint used depends largely on the porosity of the wall and its relief.
    FASALUX IMPREGNATION saves the paint (reduces of the amount of the finishing coating).

     
     
    - inside works -
     
     

    1. EXAMPLE: Stained, sooty and very dirty walls, walls with old layers of paint on them onto which the standard paints do not apply well, etc. Especially, restaurant and hotel kitchen walls.

    It is required to clean the walls mechanically, they should be free from dust, loose layers and dampness, the sooty stains are to be repaired, including also the stains from waters, old satins from aniline paints, etc.


    NEW! ANTINICOTINE PAINT
    in 1 - 2 layers solves your problem with stains.
    You can keep it as an independent coating, and you can also paint over it.
    This is so called 'self-priming' paint, which penetrates deeply into the surface, prevents the migration of the stains on the surface.

    2. EXAMPLE: standard preparation of the inside walls
    It is always recommended that JUBOL PRIMER, is applied in advance, thinned with water according to the instructions, and then you can use one of the three options for painting:
    - I option: 2 layers of - BOJANOL SEMI-DISPERSION PAINT allowing several hours between the layers and in amount suggested in instructions for use;
    - II option: 2 layers - JUBOL DISPRERSION PAINT;
    - III varijanta: 2 layers of dispersion - JUBOL PUN TON if you want to achieve very strong shades.

    - shading -

    BOJANOL SEMI-DISPERSION
    can be shaded only in pastel (soft) shades, using BON TON toner according to the instructions for use.


    White JUBOL DISPERSION PAINT can as desired be mixed with all the shades of the dispersion PUN TON by which you can get a large number of shades differing in the tone and intensity.

     
    PROTECTION AND DECORATION OF METAL SURFACES AND OBJECTS
     
    - outside works-
     
    Standard procedure


    1st and 2nd layer cca 100 g/m2 per each layer, 16 - 24 between the layers - BOJANALUX METAL PRIMER - oxide red or grey; 3rd or 4th layer cca 100 g/m2 per layer 16 - 24 hours between the layers - BOJANALUX ENAMEL LACQUER, desired shade or permanent gloss, 3. premaz, - PROFESIONAL ENAMEL LACQUER, white or dark brown.
      Working with quick-drying primers

    1st and 2nd layer cca 100 g/m2 per layer only 15 -20 min between the layers, exclusively by sprinkling (because of quick drying it cannot be applied by brush) - BOJANALUX METAL PRIMER, QUICK-DRYING, oxide red or grey 3rd layer only cca 25-30 min after - BOJANALUX QUICK-DRYING PRIMER apply BOJANALUX ENAMEL LACQUER, 4th layer, 16-24 hours after the 3rd layer - BOJANALUX ENAMEL LACQUER, cca 100 g/m2 or for permanent and exquisite gloss - PROFESSIONAL ENAMEL LACQUER
     
     
    - inside works-
     

    When decorating and protecting metal objects and surfaces inside the rooms, where there are no atmospheric influences and where there are no aggressive agents, use at least one (1) layer of BOJANALUX METAL PRIMER and desired number of layers of BOJANALUX ENAMEL LACQUERS or for exquisite and permanent gloss use PROFESIONAL ENAMEL LACQUER.

     
         
      ©2004 Yellow Pages Co.